Leaf Spring Plate Shock Mount Repair

It is common for the threaded section of the shock mount to break off if the bolt is seized. This is very easily repaired using an M12 x 30mm set screw and this set of guidelines:

 

  • Clean back the shock mount.  

  • Run an M12 nut up the set screw.

  • Weld the threaded end to the broken shock mount.

  • Run the nut down the set screw and cut off the head.

  • When the nut is removed it will clean the thread where it has been cut.

  • Spray with zinc primer.

P8250221
P8250222
P8250223
P8250224
P8250225
P8250226